Truss installation

1, the first general orientation set the four base on the ground, organise the leg below, in a horizontal plane; 2, on the four corners of the outer edge of the base into the part under the oblique support, each Angle 2 root, a total of eight root; 3, put the head screwed on the base, pay attention to the direction of rotation of the head and figure of together; 4, set a good party set in the head; 5, connect the beam on the ground; 6, the ends of beams, respectively, and two ends of two sets of good docking link, at the moment beam end part is assembled on the ground; 7, connect pillar lie truss flat is good, and then put in the end on the head and the other end of the screw on the cross arm, the hanging hoist and cross arm link together, the role of the hoist is used for the following progress bar truss; 8, more than one person together the pillar truss stand up gradually, pay attention to do not force too big pushing columns to, and then fixed against the screw head; After 9, pillar erected, the hanging hoist hook through condole belt hook stay below the cross beam; 10, 4 people gradually drag hang together hoist pull beam around a person's head position; 11, above the beam installed lights audio equipment; 12, 4 people together drag hanging hoist to scheduled height to stop; 13, put one end of the inclined support and tighten the post, the other side and the base of horizontal support tighten, it sets up the finished aluminum alloy frame.
led light engine module are required in the manufacture of almost every product and led pcb module About Us is one of the most common machines.
Always do our research, follow the rules and plans ahead for additional expenses. Expanding is the goal of Demo Photoelectric Technology (Wuxi) Co., Ltd.; expanding properly is the goal of the wise business.
When you choose to buy instead of led light engine, the money you save may allow you to buy multiple other necessities, more than you had initially planned on buying.