LED light source module installation steps and precautions

The installation steps of the LED light source module are as follows:

1. The number of light source modules is estimated at equal intervals, the distribution of LED Light module source modules is simulated on the computer, and the number of light source modules required is initially estimated. The visible brightness of the module spacing needs to be between 3-150px, and the thickness of the characters can be selected between 5-325px.

2. Calculate the power of the power supply and design the number of LED light source modules of the power distribution plan budget × the power of a single LED Light module source module u003d the total power consumption. It is recommended to leave a margin for the power supply selection and use it at 80% of the rated power.

3. Install the LED light source module A: Clean the installation surface B: Use a double-sided sticker to stick to the bottom of the module. C: Arrange evenly and connect the wires. D: Install the word slot panel and measure the effect. E: Finished product

What are the precautions for LED light source modules?

1. The polarity of the LED module: the red wire is connected to the positive power supply, and the white wire is connected to the negative power supply.

2. The vertical height of the acrylic transparent cover from the LED module should be greater than 5 cm and less than 13 cm to avoid light spots or dark phenomena on the surface of the cover; the transmittance and astigmatism of different acrylic materials It has a great influence on the height and uniformity, so please pay attention to the selection.

3. Working voltage: Pay attention to the voltage consistency of the LED module and the switching power supply.

4. Paste firmly: Ensure that the LED module attached to the light box is firm and reliable, and fix it with screws if necessary.

5. Wire length: The length of the power cord should be as short as possible (recommended not to exceed 3 meters), greater than or equal to 18AWG#, and the wire diameter should be appropriately increased if it exceeds 3 meters.

The above is an introduction to the installation steps and precautions of LED light source modules. Friends who are interested in LED light source modules are welcome to consult us!

The use of led pcb module About Us is a great trend in today's world. What you should know is that it has become a very important part of business today.
Our knowledgeable loss prevention experts can help commercial customers reduce losses in About Us.
Data has always been important in business, of course. But with the arrival of digital data—its volume, depth, and accessibility—it has become clear it is key to helping Demo Photoelectric Technology (Wuxi) Co., Ltd. develop sustainable competitive advantage.
Demo Photoelectric Technology (Wuxi) Co., Ltd. sells ac led modules and yet their focus on operational excellence and mastery of distributed manufacturing facilities led light engine has made them the dominant player in the space.
Demo Photoelectric Technology (Wuxi) Co., Ltd. also has an extensive line of products as About Us.