how to use an rgb led
Used to make mood lights, emoji bots, or cool LED Light module effects.
But simply set the color (Hue)
It can be a bit tricky because you need to convert the brightness values for each red, green, and blue LEDs to separate brightness values.
Wiring the circuit as follows: Red LED anode: D3 Green LED anode: d4 blue LED anode: d4 public cathode-
> 220 ohm resistance-
> GndNOTE: the common cathode resistance provides you with the simplest wiring, and the matching of color to tone value may be a little inaccurate, because the forward voltage drop of the color LEDs is very different.
For more accurate color reproduction, use the 3 220 ohm resistors of the Arduino pin to the anode and connect the cathode directly to the Gnd.
The hue is the value from 0 to 360 (degrees)
It describes the position of the selected color on the color wheel.
Look at pictures and see all kinds of colors (
Source: brightness is controlled separately.
We need some code to convert hue and brightness to RGB level to get into the led.
Note: the maximum value that 8-digit numbers can hold is 255.
Therefore, the hue value is scaled from 0 to 255 instead of from 0 to 360.
/* From Arduino Cookbook, Recipe 7. 4 (Open Source)
Demo Photoelectric Technology (Wuxi) Co., Ltd., the best suppliers of domestic markets, has good faith in manufacturing.
Try out dob led pcb About Us to beautify your led pcb module. Visit Demo Led Module to get your dreaming at a favorable price.
Before investing in a led light engine About Us, it can benefit to have an understanding of the different types of and the most effective strategies to led light engine module. Go to Demo Led Module for more tips.