60w led lightbar for 2016-up toyota tacoma install guide
This strip is only available for the Hood spoon of Toyota Tacoma for 2016 and later versions.
The following steps will show you how to install the Hood spoon mounted on the 60w cree led light strip: remove the four screws of the yellow circle and remove the hood spoon from the hood.
Flip the released Hood spoon.
Remove four external screws and loosen the Hood spoon (76181)
From the black screen (76182).
Please refer to this chart to familiarize yourself with the parts you will be using.
Tighten the bolts as shown in the following figure.
You will mark the drilling position on 76182 using the protruding bolts.
Place the strip on 76182 and mark the position of the bolt contact.
Drill holes in those places.
Bolt the nut through the mounting bracket and fix the strip on 76182.
Screw back 76181.
Screw the Hood spoon back into your hood.
Connect the strip using the attached relay harness with an on/off switch.
Once it lights up the way it should, you can now enjoy the strip installed with your new Hood spoon!
Buy more off-
LED lighting for road trucks in shops. ijdmtoy. com today!
The use and installation of About Us is compared with most other systems for managing the led light engine effectively and no doubt About Us have won the race so many times.
It is clear that is one of the best methods that can be used for the purposes of led pcb board. If you want an and other led pcb module, you should find the right provider who will guide you through and offer something that will help your business. For quality , go to Demo Led Module.
Demo Photoelectric Technology (Wuxi) Co., Ltd. sells led light engine module and yet their focus on operational excellence and mastery of distributed manufacturing facilities dob led pcb has made them the dominant player in the space.