Tel:
Email:Address
2/F, Block D, Liye Building, University Science Park, No. 20, Qingyuan Road, Xinwu District, Wuxi city, Jiangsu Province, China. 214000 无锡德盟光电科技有限公司.
Latest products
Introduce the instructions for using the LED light source module
by：Demo
2021-07-01
The LED LED Light module source module is able to carry out the maximum optical design, heat dissipation design, shape, size design and interface standardization design according to any form of application. Through the above design, the standardized combination of lamps and lanterns in different application places can be realized, so as to achieve convenience and basis. The function of the life-span replaceable module realizes the reduction of user cost to a large extent.
The color rendering index (the ability of the light source to reproduce the true color) is one of the three important indicators to measure the quality of the white light source, and it is also an important standard for measuring the health of the LED LED Light module source module. It is in the various indicators of the lighting field. The status is particularly obvious.
Instructions for use:
1. At this stage, the light source using luminous characters is mainly LED three-lamp, five-lamp, and six-lamp light source modules with conventional settings and input voltages of DC12V. It is necessary to use a constant voltage switching power supply to output DC12V as the power source. , So please pay attention to if there is no switching power supply when installing the luminous characters, do not directly connect the luminous characters or the LED Light module source module to the mains AC 220V, otherwise the LED light source module will be burned out due to the high voltage.
2. In order to avoid long-term full-load operation of the switching power supply, the power of the switching power supply and the LED load is preferably 1:0.8. According to this configuration, the service life of the product will be more secure and lasting.
3. If the modules exceed 25 groups, they should be connected separately, and then connected to the outside of the LED box by high-quality copper core wires larger than 1.5 square millimeters in parallel. The length of the power cord should be as short as possible, such as more than 3 The wire diameter must be increased appropriately. The unused wires at the end of the module must be cut and pasted to avoid short circuits. If necessary, use self-tapping screws to fix the non-waterproof series. For outdoor use, the groove type must be waterproof;
4. To have sufficient brightness, the visible brightness of the module spacing needs to be between 3 and 6 cm thick, and 5 to 15 cm can be selected.
5. In the process of using LED light source modules, we must pay attention to the problem of voltage drop. Don't just make one loop, connect the end in series from the beginning. Doing so will not only cause inconsistent brightness between the end and the end due to the difference in voltage, but also cause the problem of burning the circuit board due to excessive single current. The correct way is to connect as many circuits in parallel as possible to ensure a reasonable distribution of voltage and current.
6. If anti-corrosion materials are used inside the cavity, use white primer as much as possible to increase its reflection coefficient.
Look at the trends, both economic and consumer, for indications on your Demo Photoelectric Technology (Wuxi) Co., Ltd.'s staying power.
Demo Photoelectric Technology (Wuxi) Co., Ltd. provides which will help you ac led modules in a durable and reliable way. To learn more, go to Demo Led Module.
As the manufacturing procedure of About Us becomes more regulated, the costs to businesses will increase and the workforce will suffer as a result.
The color rendering index (the ability of the light source to reproduce the true color) is one of the three important indicators to measure the quality of the white light source, and it is also an important standard for measuring the health of the LED LED Light module source module. It is in the various indicators of the lighting field. The status is particularly obvious.
Instructions for use:
1. At this stage, the light source using luminous characters is mainly LED three-lamp, five-lamp, and six-lamp light source modules with conventional settings and input voltages of DC12V. It is necessary to use a constant voltage switching power supply to output DC12V as the power source. , So please pay attention to if there is no switching power supply when installing the luminous characters, do not directly connect the luminous characters or the LED Light module source module to the mains AC 220V, otherwise the LED light source module will be burned out due to the high voltage.
2. In order to avoid long-term full-load operation of the switching power supply, the power of the switching power supply and the LED load is preferably 1:0.8. According to this configuration, the service life of the product will be more secure and lasting.
3. If the modules exceed 25 groups, they should be connected separately, and then connected to the outside of the LED box by high-quality copper core wires larger than 1.5 square millimeters in parallel. The length of the power cord should be as short as possible, such as more than 3 The wire diameter must be increased appropriately. The unused wires at the end of the module must be cut and pasted to avoid short circuits. If necessary, use self-tapping screws to fix the non-waterproof series. For outdoor use, the groove type must be waterproof;
4. To have sufficient brightness, the visible brightness of the module spacing needs to be between 3 and 6 cm thick, and 5 to 15 cm can be selected.
5. In the process of using LED light source modules, we must pay attention to the problem of voltage drop. Don't just make one loop, connect the end in series from the beginning. Doing so will not only cause inconsistent brightness between the end and the end due to the difference in voltage, but also cause the problem of burning the circuit board due to excessive single current. The correct way is to connect as many circuits in parallel as possible to ensure a reasonable distribution of voltage and current.
6. If anti-corrosion materials are used inside the cavity, use white primer as much as possible to increase its reflection coefficient.
Look at the trends, both economic and consumer, for indications on your Demo Photoelectric Technology (Wuxi) Co., Ltd.'s staying power.
Demo Photoelectric Technology (Wuxi) Co., Ltd. provides which will help you ac led modules in a durable and reliable way. To learn more, go to Demo Led Module.
As the manufacturing procedure of About Us becomes more regulated, the costs to businesses will increase and the workforce will suffer as a result.
Custom message
