Tel:
Email:Address
2/F, Block D, Liye Building, University Science Park, No. 20, Qingyuan Road, Xinwu District, Wuxi city, Jiangsu Province, China. 214000 无锡德盟光电科技有限公司.
What are the differences between P4 and P5 LED full-color display models
by：Demo
2021-07-08
What is the difference between the P4P5 indoor full-color screen? Which kind of full-color LED display has high definition and good effect? u200bu200bThe price is cheap and the effect can meet the needs of most customers? First look at the main technical parameters of the P4 and P5 models:
Pixel composition, pixel pitch, pixel density, maximum brightness, driving mode, average power consumption, best viewing distance
P41R1G1B4mm62500 dots/㎡≥2400CD/㎡1/16 scan 580W3~40M
P51R1G1B5mm4000 dots/㎡≥3200CD/㎡1/8 scan 390W5~60M
The LED display effect depends on the technical parameters of each model, and the most objective conclusion will be obtained from the analysis of the difference between P4 and P5 from the above table.
1, Pixel composition. Because it is an indoor technology, each pixel has a red, green, and blue wick (outdoor screens sometimes need to increase the brightness of the red LED Light module). The dot pitch is the basis for distinguishing between models and directly determines the pixel resolution that a single square meter of LED display can hold. The P4 model's dot pitch technology has been indented by 1mm, and the pixel dots have increased by more than 20,000. (In the field of high-definition LED electronic screens, each indentation of the dot pitch by one unit is a technological breakthrough.)
2, The driving method determines the brightness of the screen. At the same time, because the P5 model has fewer pixels per square meter, the brightness is higher than that of the P4 model. If it is semi-outdoor, or indoors near the window, you must choose a higher-brightness model. There are many factors affecting power consumption. The reason why the P4 consumes a lot of power is mainly determined by the characteristics of more pixels and brightness greater than 2200cd/㎡.
3. Special summary: The P5 generation of LED display manufacturers led the large led screen to enter the field of indoor high-definition large-screen display. It can be said to be the leader in the high-definition field, but according to the visual display standard, P5 is difficult to achieve 1 square meter display The ideal requirement of the picture. As mentioned earlier, the P4 single-square-meter resolution is 25,000 points higher. This technological breakthrough has achieved the pursuit of a 1-square-meter ultra-clear display effect. The LED approach is another ultra-clear field. Only then have ultra-clear displays such as P3 and P2.5 later.
Demo Photoelectric Technology (Wuxi) Co., Ltd. have now make a decision to enlarge our company in other countries.
To be the safest, most progressive domestic About Us, relentless in the pursuit of customer and employee excellence.
Our company specializes in selling About Us as well as providing relevant services.
Among improvements to About Us, nearly half of consumers considered quality and service as the most important change a business could make in its supply chain.
About Us, is an alternative product for led light engine module to investors and consumers who are passionate about our products or services.
Pixel composition, pixel pitch, pixel density, maximum brightness, driving mode, average power consumption, best viewing distance
P41R1G1B4mm62500 dots/㎡≥2400CD/㎡1/16 scan 580W3~40M
P51R1G1B5mm4000 dots/㎡≥3200CD/㎡1/8 scan 390W5~60M
The LED display effect depends on the technical parameters of each model, and the most objective conclusion will be obtained from the analysis of the difference between P4 and P5 from the above table.
1, Pixel composition. Because it is an indoor technology, each pixel has a red, green, and blue wick (outdoor screens sometimes need to increase the brightness of the red LED Light module). The dot pitch is the basis for distinguishing between models and directly determines the pixel resolution that a single square meter of LED display can hold. The P4 model's dot pitch technology has been indented by 1mm, and the pixel dots have increased by more than 20,000. (In the field of high-definition LED electronic screens, each indentation of the dot pitch by one unit is a technological breakthrough.)
2, The driving method determines the brightness of the screen. At the same time, because the P5 model has fewer pixels per square meter, the brightness is higher than that of the P4 model. If it is semi-outdoor, or indoors near the window, you must choose a higher-brightness model. There are many factors affecting power consumption. The reason why the P4 consumes a lot of power is mainly determined by the characteristics of more pixels and brightness greater than 2200cd/㎡.
3. Special summary: The P5 generation of LED display manufacturers led the large led screen to enter the field of indoor high-definition large-screen display. It can be said to be the leader in the high-definition field, but according to the visual display standard, P5 is difficult to achieve 1 square meter display The ideal requirement of the picture. As mentioned earlier, the P4 single-square-meter resolution is 25,000 points higher. This technological breakthrough has achieved the pursuit of a 1-square-meter ultra-clear display effect. The LED approach is another ultra-clear field. Only then have ultra-clear displays such as P3 and P2.5 later.
Demo Photoelectric Technology (Wuxi) Co., Ltd. have now make a decision to enlarge our company in other countries.
To be the safest, most progressive domestic About Us, relentless in the pursuit of customer and employee excellence.
Our company specializes in selling About Us as well as providing relevant services.
Among improvements to About Us, nearly half of consumers considered quality and service as the most important change a business could make in its supply chain.
About Us, is an alternative product for led light engine module to investors and consumers who are passionate about our products or services.
Custom message
