Use method of indoor LED display screen stainless steel edging

The application of led display is more and more extensive, and the small-pitch display has become the leader in 2019. The friends have received the project, and always want to do things well and beautifully, so in terms of project budget, it would be great if we can save more labor costs. I have seen that there are already a lot of introduction methods for the steel structure of display screens on the Internet. Now I will share with you the article on the edge of the display screen.



If the indoor display screen is wrapped with aluminum foil, the cost is of course cheaper, but the steps are much more troublesome than the stainless steel edging. The key is that it is relatively low from the design and aesthetic point of view. And the use of titanium stainless steel edging, high-end atmosphere can also highlight the overall beauty of the display. We choose titanium stainless steel edging. You can first make the provided steel structure design drawings and find a local manufacturer to make them, but there are a few points that need to be noted:



1. Calculate the amount of all projects according to the drawings. For small-sized screens, the material formed at one time must ensure the margin of the net size, which is generally controlled within 0.5cm. If the size of the display screen is relatively large, the material length can be calculated as a margin of 5~10cm, and the splicing part of the edging is directly embedded at the bottom. This advantage is to facilitate the accurate guarantee of the margin of the net size.



2. Calculate the size of the curling (stainless steel folding) according to the actual display thickness. If the manufacturer has the conditions, it is best to punch out the blinds at the top and bottom to facilitate heat dissipation inside the display.



3. The corner part of the hemming is best done by the manufacturer, and only needs to be spliced u200bu200bto the construction site.



4. If it is a display steel structure protruding from the wall, there is no support part at the bottom and need post-maintenance, it is best to add cushioned angle steel or other materials at the bottom of the structure to prevent maintenance personnel from accidentally stepping on the air , It is not easy to restore the deformation of stainless steel edging.



Let’s talk about the steps of installing large-size screen edging:



Sort the processed edgings up, down, left, and right, and you can install them from the top or bottom. The top and bottom of the edging are not easy to be seen and can be fixed with countersunk dovetail screws.



The position of the side can be fixed with glue.



Note that the stainless steel must be close to the structural steel pipe



After sticking the stainless steel up



Use a hammer to strike steady



Finally, take the wooden block and nail down the place that needs to be tidyed down



Prevent instability of stainless steel paste



Or loose and falling.



At this time, you need to check repeatedly



Does the stainless steel fit tightly?



Every step must be done rigorously and meticulously



The intersection of the splicing place needs to measure the size, and the size that is too long should be cut as much as possible.



If you don't plan to do cross-over processing of hemming



The stainless steel size must be accurate



Use a cutting machine to cut stainless steel



Take the angle ruler to measure the size of the angle



Keep repeating these actions



Fix the exact size little by little



Smooth all around the cuts



Proceed to the next step



In this way, step by step until the whole edging is completely spliced, the wooden block used for pressing will be removed the next day.

The use and installation of About Us is compared with most other systems for managing the led pcb module effectively and no doubt About Us have won the race so many times.
During Demo Photoelectric Technology (Wuxi) Co., Ltd.’s existence in a market we didn’t receive any negative feedback from our customers.
Demo Photoelectric Technology (Wuxi) Co., Ltd. has unique staffs who will serve you with their best ideas by affording you with high-quality service.
Offering a loyalty program not only makes customers feel valued, but it allows Demo Photoelectric Technology (Wuxi) Co., Ltd. to easily collect important information about customers.
About Us has a very good repute over the global market.