Installation method of LED module light source lamp belt

LED light, this is something we are very familiar with, and it is used in many places in our daily life. For the LED module light source light strip, I believe that many friends have come into contact with it. In general households, there will also be LED module light source light strips, which have a very strong decorative effect, and are also widely used in industries such as automobiles and advertising bars. Today, I will explain to you the installation method of LED module light source strips.

How to install LED module light source strip

1. The wiring method (power connection) of the LED module light source strip is usually like this. Because its general voltage is DC 12V, it needs to use a switching power supply. The size of the power supply is determined according to the power and connection length of the LED module light source strip.

2. Of course, the installation of LED module light source lamp belt pays more attention to the waterproof performance and whether the installation is firm. Because the LED module light source strip usually has to withstand wind and rain, if 3M glue is used to fix it, the 3M adhesive will decrease over time and cause the LED module light source strip to fall off. Therefore, the card slot is often used to fix the installation. Where it needs to be cut and connected, it is only necessary to prepare additional waterproof glue to consolidate the waterproof effect of the connection point. Then use a special fixing clip to fix the eye with an electric hammer, and fix the clip with a plastic expansion tube and screws. In this way, it can be strong underground in the stormy weather.

3. If you want to use a large power supply to achieve the changing effect of the LED module light source strip, you need the help of the controller. When wiring, the light strips generally have a common anode, that is, one of the light strips is +12V and the others are negative RGB and three negative electrodes, which means that the control distance of each controller is different. Generally speaking, the control distance of the simple controller is 10-15m, the control distance of the remote controller is 15-20m, and the longer it can be controlled up to 30m. If the connection distance of the LED module light source strip is long, and the controller cannot control that long strip, we need to use a power amplifier to tap.

I want to share with you here. The commonly used 3528 series of LED module light source strips have a connection distance of 20m, and the 5050 series of LED module light source strips have a length of 15m. If this connection distance is exceeded, the light strip will easily become hot and hot, which will affect the service life of the LED module LED Light module source light strip during use.

4. The wiring method of the monochromatic LED module light source strip is to distinguish the positive and negative poles. Usually we need to prepare a welded power plug, and then directly insert it into the position above the light strip power supply. If you don’t want If each LED module light source strip is controlled by a power supply, you can buy a switching power supply with larger power as the total power supply, and then connect all the LED module light source strips input power in parallel, and be supplied by the main switching power supply. . In this way, the effect of centralized control can be achieved, but the inconvenience is that it cannot achieve the lighting effect and switch control of a single LED module light source lamp strip.

The above is the installation method of the LED module light source light strip, I hope it can be useful to all friends. If you have any questions during the installation process, you should consult a professional manufacturer. We, Jiangmen Demeng Optoelectronics Lighting Technology Co., Ltd., was established in the ancient town of Dengdu in 2004, and have been focusing on LED research and development and manufacturing for 15 years. At the same time, we also welcome everyone to consult.

Demo Photoelectric Technology (Wuxi) Co., Ltd. helps high-profile clients build strategic relationships that drive company growth, investments, funding and more. There are many make-or-break details involved in the day-to-day manufacturing within our company.
Demo Photoelectric Technology (Wuxi) Co., Ltd. will expand our presence in direct selling and lead the reinvention of the channel, offering an entrepreneurial opportunity that delivers superior earnings, recognition, service and support, making it easy and rewarding to be affiliated with Demo and elevating the image of our industry.
Demo Photoelectric Technology (Wuxi) Co., Ltd. have been an established and popular company with an excellent track record for the best customer satisfaction.
ac led modules About Us with led pcb board are used extensively in led light engine.